Lynq's core technology is an intelligent comms network that excels in comms denied / contested environments:
- RF quiet (LPI / LPD)
- Long range and jamming resistant
- AES 256 bit encrypted peer to peer & mesh
- Adaptive power algorithm
- Self forming / self healing (rapidly deployable)
- No existing infrastructure required
The Lynq PRO is a grab and go solution for clandestine messaging and battlefield tracking”
-TSgt Air Force Special Warfare Special Program Office
-TSgt Air Force Special Warfare Special Program Office
Lynq PRO is an ATAK compatible next gen blue force tracker for enhanced situational awareness that utilizes the Lynq peer to peer network -- capable of secure vector based location of squad members, clandestine messaging, and man down detection.
Lynq PRO works with or without an EUD. If you have one, you use can apps like ATAK anywhere.
Lynq PRO
-
Simple quick set up in seconds: "grab and go"
-
ATAK compatible - team leaders can establish common operating picture on your EUDs / smartphones topographical map
-
Light weight and low cost
-
Man down detection
-
Send Short Form Messages: e.g “Medivac, Exfil, Abort, RGR”
-
Set checkpoints / RV along your route
OV-1 / BLUF: Total Situational Awareness and No Personnel Left Behind In the Field
1
“This technology has wide ranging applications for training and missions. The devices provide a SOF team quick understanding of team members location/bearing… [and] an ability to locate downed personnel who may not be able to be able to communicate.” -Ret Captain, Science & Technology Lead AFSOC/A5KB
2
“The LPI/LPD functionality enables small units and even individuals to infiltrate a near peer environment without detection. -S&T, Naval Special Warfare
3
“There is a very low learning curve to operate and is applicable to the speed of battle” -Program Manager, USASOC C5ISR
Lynq drives mission impact across the entire defense enterprise
Lynq PRO
Close
Lynq PRO
RECEIVER
UHF Frequency
902 to 928 MHz
Channel Spacing
150 kHz
Frequency Stability (-20°C, +70°C, +25°C Ref)
10 ppm
Modulation
LoRa (TM)
Digital Sensitivity (1% PER, SF10, BW125kHz)
-132 dBm
TRANSMITTER
UHF Frequency
902 to 928
Channel Spacing
150 kHz
Frequency Stability (-30°C, +60°C, +25°C Ref)
10 ppm
Low Power Output
1.5 mW
High Power Output
1 W
Modulation
LoRa (TM)
BATTERY
Battery Capacity
LiPo, 2250 mAh, 8.33 Wh
ENVIRONMENTAL
Operating Temperature
-20 to 60 C
INPUT/OUTPUT
Bluetooth*
BLE 5.0
USB Port
Micro USB 2.0
NETWORKING
Network Size
24 Devices
Payload Size
252 Bytes max
Lynq PRO
Personnel Reconnaissance Operations
FEATURES
Clandestine Messaging (EXFIL, RGR, MEDIVAC)
Battlefield Tracking
Set RV / Check points
Safe Zone
Grab and go pairing
Lynq PRO X
Close
Lynq PRO X
GENERAL DESCRIPTION
The LNQNSM01 LoRa module provides a turnkey solution for leveraging the Lynq Network Stack. It allows for the commissioning of networks using a simplified serial peripheral command interface. The FCC/IC certified design allows for rapid product development and fast time to market.
The front-end design of this module allows for operation at the limits of transmit power, providing longer range communication than competitive LoRa modules.
The LNQNSM01 is suited for long range point-to-point applications in which sensor and messaging applications are desired.
GENERAL SPECIFICATIONS
Dimensions
22 x 22 x 2.5 mm
Supply Voltage (main)
2.0 V to 3.3 V
Supply Voltage (Tx gain)
2.0 V to 4.8 V
Weight
4 g
Current Consumption, Tx
varies, 600 mA max
Current Consumption, Rx
22 mA
Current Consumption, Standby
100 nA
Antenna Pin Impedance
50 Ω
ABSOLUTE MAXIMUM RATINGS
PARAMETER
MIN
MAX
UNIT
Storage Temperature
-40
+85
°C
Operating Temperature
-40
+85
°C
VDD Operating Voltage
+2.0
+3.6
V
VFEM Operating Voltage
-0.3
+5.5
V
RECOMMENDED OPERATING CONDITIONS
PARAMETER
MIN
TYPICAL
MAX
UNIT
VDD supply voltage
+2.0
+3.3
+3.6
V
VFEM supply voltage*
+2.0
+3.3
+4.8
V
Voltage Int logic high
0.75 x VDD
-
-
V
Voltage INT logic low
-
-
0.3 x VDD
V
CHARACTERISTICS
CHARACTERISTIC
MIN
TYPICAL
MAX
UNIT
Vdd
2.0
3.3
3.6
V
Vfem
2.0
3.3
4.8
V
Disable Current
-
500
-
nA
Standby Current
-
800
-
mA
Transmit Current
20
-
590
mA
Operating Temperature
-40
+25
+85
°C
RADIO SPECIFICATIONS
Modulation
CSS (LoRa)
Frequency Range
902-928 MHz
Channel Spacing
41.6 kHz, 62.5 kHz, 128 kHz, 250 kHz
Channel Bandwidth
20.8 kHz, 31.25 kHz, 62.5 kHz, 125 kHz
Link Budget
163
Receiver Sensitivity
As low as -133 dBm
Adjacent Channel Selectivity
90 dB
Power Output
Up to 1 W
Frequency Stability
±10 ppm or less
CERTIFICATION
This equipment has been tested and found to comply with compliance regulations for the FCC and IC.
FCC ID: 2ARHMLNQNSM01M
IC ID: 24896-LNQNSM01
Lynq PRO X
Personnel Reconnaissance Operations
FEATURES
All Lynq PRO features including ATAK functionality
Send messages from ATAK EUD
Set check points / RV from ATAK EUD
Establish common operating picture on ATAK EUD
Set Safe Zone from ATAK EUD
Lynq PRO Deployment Kit
Close
Lynq PRO Deployment Kit
GENERAL SPECIFICATIONS
Case Dimensions LxWxH
20.5 x 11.3 x 6.8 in
No. of Lynq PRO Devices Supported
12 devices
Charging Power Per Device
5V / 1 A
Operating System
ENVIRONMENTAL
Operating Temperature
-20 to 60 C
INPUT/OUTPUT
Power Input
12V / 10A
Power Connector
2.1mm barrel plug
USB Port
2x USB 3.0
Lynq PRO Deployment Kit
Lynq drives mission impact across the entire defense enterprise
FEATURES
Infinitely scalable software that can be integratable into any devices
Integratable into any devices
Infinitely scalable software that can be integratable into any devices
Infinitely scalable software that can be integratable into any devices
Integratable into any devices
OTTO is the world’s largest manufacturer of radio communications accessories for the military, public safety, and first responder markets. For over 25 years they have designed innovative comms products for demanding applications and they are recognized worldwide for superior performance. Their strong mechanical, electrical and RF Design Engineering capability, world-class test lab and computer controlled production line testing is unmatched in the industry.
